Incubators, Memmert Peltier-cooled IPP Models, SingleDisplay or TwinDisplay and Storage IPS Models, Generation 2012
Overview
Memmert cooled incubators are used in all areas of microbiology, from environmental research and environmental protection to foodstuff examination, pharmacy and water engineering. Memmert IPP Peltier-cooled incubators have advantages that make them the best choice for many laboratory uses. For larger volumes with the need for rapid temperature changes, the Memmert ICP compressor-cooled incubators are recommended.
The Memmert IPP Peltier-cooled incubators are the choice if more compact, quiet and vibration free solutions are appropriate, with more moderate loads and temperature changes.
The Memmert IPS Peltier-cooled storage incubators are the sensible and economic choice for storage, breeding or other uses that do not demand rapid changes in temperature, but require absolute reliability, precision and durability.
The Peltier cooling in the Memmert IPP and IPS incubators offer minimum energy consumption, for in contrast to compressor cooled technology, energy is only required when it is necessary to heat or cool down. The working chamber of the IPP and IPS incubators are completely sealed off from the environment, so there is minimal risk of samples drying out. Condensation formation during the cooling down process takes place outside the working chamber on the Peltier element.
The excellent controllability of the IPP models combined with their extremely small control fluctuations yield precise and smooth changeover between heating and cooling in a single system. The absence of a compressor provides extra space and results in silence in the laboratory.
The conventional ICP compressor cooled incubators and the IPP or IPS Peltier cooled models incorporate a precison well-proven Memmert control system for the controlled and documented storage and incubation of micro-organisms under real environmental conditions.
Modular construction gives tremendous flexibility to custom design a unit that has the technical features and accessories to meet any need.
All of the incubators feature double doors, with the interior one glass to provide a clear view without a drop in temperature.
Easy to clean stainless steel interiors are strengthened with deep ribbing. A wide range of options for programming and documentation using interfaces are available as part of the Memmert Generation 2012 class of products.
Three-year guarantee for appliances except wear and tear parts
Features of the IPP and IPS Peltier Cooled Incubators:
IPP temperature range up to + 70°C
Five IPP model sizes from 32L to 749L
Choice of IPP models with SingleDisplay or TwinDisplay
Double doors, with interior glass and exterior stainless steel, secure 2-point closure
Extraordinarily quiet operation
Efficient Peltier heating and cooling uses energy only on demand, when required
IPS temperature range +14 to + 45°C
IPS model sizes 256L and 749L
Specifications (Click here):
Incubators, Memmert Peltier-cooled IPP Models, SingleDisplay or TwinDisplay and Storage IPS Models, Generation 2012
Chamber modification to IPP750 or IPP750Plus for the application of reinforced perforated stainless steel shelves or stainless steel grids, includes the replacement of 2 standard grids by 2 reinforced grids
Inquire
T7
Light module cold white 5500 Kelvin: light strips arranged on the side walls of the interior, 10 strips for model 110, 14 for model 260 and 750, illumination strength 10,000 Lux, program controlled dimming from 0 to 100% (in 10% steps), ramp programming in combination with temperature and humidity
Inquire
T8
Light module cold white 5500 Kelvin plus warm white 2700 Kelvin: LED light strips (5 resp. 7 alternating cold white light strips and 5 resp. 7 warm white light strips) on the side walls of the interior, for models 110 and larger, illumination strength 10,000 Lux, program controlled dimming from 0 to 100% (in 10% steps), ramp programming in combination with temperature and humidity
Inquire
R3
Interior socket option, limits temperature range to maximum 70°C, switches off using On/Off switch but not individually
Inquire
FX
Entry port option, 23mm Ø, for introducing connections at the side, can be closed by flap, position F0 for left center center, F1 for left center top, F2 for right center center, F3 for right center top, F4 for special position left side, F5 for special position right side
Inquire
F4
Entry port option, 23mm Ø, for introducing connections at the side, can be closed by flap, F4 for special position left side
Inquire
F5
Entry port option, 23mm Ø, for introducing connections at the side, can be closed by flap, F5 for special position right side
Inquire
F6
Entry port option, 23mm Ø, for introducing connections at the back, can be closed by flap, F6 for special position back side
Inquire
D6
Entry port option, 14mm Ø, for introducing connections at the back, can be closed by flap, D6 special position back side
Inquire
F7
Entry port option, 38mm Ø, for introducing connections at the back, can be closed by flap, F7 special position back side
Inquire
V3
4-20 mA current loop interface option (0 to +90°C corresponds to 4-20 mA) temperature controller actual value
Inquire
V6
4-20 mA current loop interface option (0 to +90°C corresponds to 4-20 mA) temperature of a Pt100 sensor positioned flexibly in chamber (maximum 1 in SingleDisplay, 3 in TwinDisplay)
Inquire
D00129
IPP Works calibration certificate option for 3 temperatures, +5°C,+37°C and +60°C
Inquire
D00131
IPS Works calibration certificate option for a single selectable temperature value
Inquire
E28884
Stainless Steel Grid shelving (standard equipment) for IPP30 and IPP30Plus
Inquire
E20164
Stainless Steel Grid shelving (standard equipment) for IPP55 and IPP55Plus
Inquire
E20165
Stainless Steel Grid shelving (standard equipment) for IPP110 and IPP110Plus
Inquire
E28891
Stainless Steel Grid shelving (standard equipment) for IPP260, IPP260Plus and IPS260
Inquire
E20182
Stainless Steel Grid shelving (standard equipment) for IPP750, IPP750Plus and IPS750
Inquire
B04055
Stainless Steel Grid shelving (standard equipment) for IPS750
Inquire
E29767
Reinforced stainless steel grid for model size 110, maximum loading 60kg
Inquire
E29766
Reinforced stainless steel grid for model size 260, maximum loading 60kg
Inquire
B32190
Reinforced stainless steel grid for model size 750, with guide bars and fixing screws, must be used only with option K1, maximum loading 60 kg
Inquire
B29727
Perforated stainless steel shelf, 10 mm Ø holes, for IPP30 and IPP30Plus
Inquire
B03916
Perforated stainless steel shelf, 10 mm Ø holes, for IPP55 and IPP55Plus
Inquire
B00325
Perforated stainless steel shelf, 10 mm Ø holes, for IPP110 and IPP110Plus
Inquire
B29725
Perforated stainless steel shelf, 10 mm Ø holes, for IPP260, IPP260Plus and IPS260
Inquire
B34727
Perforated stainless steel shelf, 10 mm Ø holes, for IPP750, IPP750Plus and IPS750
Inquire
B32191
Reinforced perforated stainless steel shelf, for IPP750, IPP750Plus and IPS750, with guide bars and fixing screws, must be used only with option K1, maximum. loading 60kg
Inquire
E02070
Slide in stainless steel drip tray, 15mm rim, may affect temperature distribution, cannot be used with option K1, for IPP30 and IPP30Plus
Inquire
E02072
Slide in stainless steel drip tray, 15mm rim, may affect temperature distribution, cannot be used with option K1, for IPP55 and IPP55Plus
Inquire
E02073
Slide in stainless steel drip tray, 15mm rim, may affect temperature distribution, cannot be used with option K1, for IPP110 and IPP110Plus
Inquire
E29726
Slide in stainless steel drip tray, 15mm rim, may affect temperature distribution, cannot be used with option K1, for IPP260, IPP260Plus and IPS260
Inquire
B04356
Bottom stainless steel drip tray, 15mm rim, may affect temperature distribution, cannot be used with option K1, for IPP30 and IPP30Plus
Inquire
B04358
Bottom stainless steel drip tray, 15mm rim, may affect temperature distribution, cannot be used with option K1, for IPP55 and IPP55Plus
Inquire
B04359
Bottom stainless steel drip tray, 15mm rim, may affect temperature distribution, cannot be used with option K1, for IPP110 and IPP110Plus
Inquire
B29722
Bottom stainless steel drip tray, 15mm rim, may affect temperature distribution, cannot be used with option K1, for IPP260, IPP260Plus and IPS260
Inquire
B04362
Bottom stainless steel drip tray, 15mm rim, may affect temperature distribution, cannot be used with option K1, for IPP750, IPP750Plus and IPS750
Inquire
GA1Q5
One year guarantee extension, size 160 and smaller
Inquire
GA2Q5
One year guarantee extension, size 260 and larger
Inquire
B6
Door with safety lock option, Generation 2012
Inquire
D4
Process dependent door lock option (only for units with TwinDisplay), Generation 2012
Inquire
V5
Door open recognition option (only for units with TwinDisplay), Generation 2012
Inquire
B8
Door hinged on left option, Generation 2012
Inquire
H5
Potential-free contact option (24 V/2 A) with socket to NAMUR NE 28 for external monitoring (indicates when setpoint is reached), Generation 2012
Inquire
H6
Potential-free contact option for combination error message such as supply failure, sensor fault or fuse, Generation 2012
Inquire
H72
Potential-free contact option (24 V/2 A) with socket to NAMUR NE 28 for signal generation, controlled by program segment, for a total of three selectable functions to be activated, including control of such elements as audible and visual signals, exhaust motors, fans or stirrers (only for units with TwinDisplay), maximum 2 contacts for 1–ph. units, Generation 2012
Inquire
H74
Potential-free contact option (24 V/2 A) with socket to NAMUR NE 28 for signal generation, controlled by program segment, for a total of three selectable functions to be activated, including control of such elements as audible and visual signals, exhaust motors, fans or stirrers (only for units with TwinDisplay), maximum 4 contacts for 3–ph. units, Generation 2012
Inquire
H4
Flexible Pt100 option for positioning in chamber or in load with socket, 4-pin, according to NAMUR NE 28, for external load temperature recording, maximum 3 sensors, Generation 2012
Inquire
H8
Additional Pt100 temperature sensor option for positioning in chamber or load, for local temperature measurement (up to maximum of 3 additional sensors), measurements can be displayed, recorded in the integral ring store, documented with the AtmoCONTROL software or printed on an attached device, Generation 2012
Inquire
C3
MobileALERT option, notification by SMS in case of any error or alarm of the device, requires option H6 “floating contact for alarm”, Generation 2012
Inquire
A8-X
Temperature restriction option (for UN/UF/UNplus/UFplus) temperature choice X = 60, 70, 80, 95, 100, 120, 160, 180, 200, 220 or 250°C, Generation 2012
Inquire
E06192
USB-Ethernet adapter, Generation 2012
Inquire
E06189
USB connection cable for computer interface, Generation 2012
Inquire
E29778
USB User-ID stick, prevents unauthorized access, only for units with TwinDisplay, Generation 2012
Inquire
E29780
USB stick with documentation software, AtmoCONTROL and operation manual, for products with SingleDisplay (standard for products with TwinDisplay), Generation 2012
Inquire
B29768
Set of four height adjustable feet (not for 450 or larger sizes), Generation 2012
Inquire
B29744
Stacking set (4 pieces) for stacking of models of the same size (not for 160 or larger sizes), Generation 2012
Inquire
B20718
Plug-in tube extension (outer diam. 60.3 mm, inner 57 mm), straight, for exhaust air ducting (if necessary for connection by hose), only models U, I, and S, Generation 2012
Inquire
B20719
Plug-in tube extension (outer diam. 60.3 mm, inner 57 mm), angled, for exhaust air ducting (if necessary for connection by hose), only models U, I, and S, Generation 2012
Inquire
B297XX-AS
Flush-fit unit (stainless steel frame covering gap between oven and wall opening), with air slots, XX = 28 (size 30), 30 (size 55), 32 (size 75), 34 (size 110), 36 (size 160), 38 (size 260), 40 (size 450) or 42 (size 750 and larger), Generation 2012
Inquire
B297XX
Flush-fit unit (stainless steel frame covering gap between oven and wall opening), without air slots, XX = 29 (size 30), 31 (size 55), 33 (size 75), 35 (size 110), 37 (size 160), 39 (size 260), 41 (size 450) or 43 (size 750 and larger), Generation 2012
Inquire
B29745
Subframe for size 30, adjustable to height 600 mm, Generation 2012
Inquire
B29747
Subframe for size 55 or 75, adjustable to height 600 mm, Generation 2012
Inquire
B29749
Subframe for size 110 or 160, adjustable to height 500 mm, Generation 2012
Inquire
B29751
Subframe for size 260, adjustable to height 500 mm, Generation 2012
Inquire
B29753
Subframe for size 450, adjustable to height 500 mm, Generation 2012
Inquire
B29746
Subframe on castors for size 30, adjustable to height 660 mm, Generation 2012
Inquire
B29748
Subframe on castors for size 55 or 75, adjustable to height 660 mm, Generation 2012
Inquire
B29750
Subframe on castors for size 110 or 160, adjustable to height 560 mm, Generation 2012
Inquire
B33657
Subframe for size 30, adjustable in height (height 130 mm, for example for units with fresh-air filter), Generation 2012
Inquire
B33659
Subframe for size 55 or 75, adjustable in height (height 130 mm, for example for units with fresh-air filter), Generation 2012
Inquire
B33661
Subframe for size 110 or 160, adjustable in height (height 130 mm, for example for units with fresh-air filter), Generation 2012
Inquire
B33664
Subframe for size 260, adjustable in height (height 130 mm, for example for units with fresh-air filter), Generation 2012
Inquire
B29762
Castor frame, 2-part for size 30, height 140mm, Generation 2012
Inquire
B29763
Castor frame, 2-part for sizes 65 or 75, height 140mm, Generation 2012
Inquire
B29764
Castor frame, 2-part for size 110 or 160, height 140mm, Generation 2012
Inquire
B29765
Castor frame, 2-part for size 260, height 140mm, Generation 2012
Inquire
FDAQ1
AtmoCONTROL Software, meets the requirements for the use of electronically stored data sets and electronic signatures as laid down in Regulation 21 CFR Part 11 of the US Food and Drug Administration (FDA), base license for the control of one unit (only for units with TwinDisplay), Generation 2012
Inquire
FDAQ2
Integration of additional units (up to maximum 15 units) into an already existent FDA-software license (only for units with TwinDisplay), Generation 2012
Inquire
D00124
IQ document with works test data for chamber,OQ/PQ check list as support for validation by user, Generation 2012
Inquire
D00125
IQ/OQ document with works test data for chamber, including temperature distribution survey for one free-selectable temperature value, 9 measuring points to DIN 12880:2007-05 (further temperature values on demand), PQ check list as support for validation by users, model size 30, Generation 2012
Inquire
D00127
IQ/OQ document with works test data for chamber, including temperature distribution survey for one free-selectable temperature value, 27 measuring points to DIN 12880:2007-05 (further temperature values on demand), PQ check list as support for validation by users, model sizes 55 and larger, Generation 2012
Inquire
D00136
IQ/OQ document with works test data for chamber, including temperature distribution survey for one free-selectable temperature, humidity and light value. 27 measuring points to DIN 12880:2007-05, PQ check list as support for validation by user (models HPP and ICH ), sizes 110, 260 and 750, Generation 2012
Inquire
D00137
IQ/OQ document with works test data for chamber, including temperature distribution survey for one free-selectable temperature, humidity and light value. 27 measuring points to DIN 12880:2007-05, PQ check list as support for validation by user (models HPP with light and ICH L), sizes 110, 260 and 750, Generation 2012
Inquire
B04713
External measuring instrument with sensors for daylight and UV-light, Generation 2012
Inquire
B04714
External measuring instrument with sensors with additional head for temperature and humidity measurement, Generation 2012
