Fraction Collectors, the Foxy® R1 and Foxy® R2 Multi-sample Automated
Overview
The one-rack Foxy R1 fraction collector and the two-rack Foxy R2 fraction collector offer a range of capabilities and capacities to meet practically any need. All feature cold room friendly design and are built with moisture resistant materials. Ideal for applications such as HPLC collection, low-pressure biochromatography, protein and peptide purification
By choosing from the available racks the Foxy R1 or Foxy R2 can distribute fractions into 96 well microplates, standard tube or vial sizes, and bottles. For essentially unlimited volumes, funnel racks can direct fluids to any collection vessel or downstream process.
The Foxy R2 fraction collector uses radio frequency identification (RFID) to automatically detect collection racks, for easy setup. All the racks and funnels available include RFID tags
Foxy R1 One Rack Fraction Collector Fox R2 Two Rack Fraction Collector
Features of the Foxy R1 and Foxy R2 Fraction Collectors:
Collect peaks of interest separately using any combination of slope, level, and time window reliably separates peaks by monitoring detector output, so you don’t have to expend glassware on no-interest effluent
Collect uniform fractions by time, drop count, or pumped volume
Stores up to 8 collection methods
Choice of available racks, the Foxy R1 takes 1, the Foxy R2 takes two, specified when ordering
Coldroom friendly design
Sturdy cast aluminum frame
Easy to use symbolic touch screen interface
Built-in Ethernet and RS-232 communication capabilities
Faster tube changes
µL delay volume between diverter valve and drop former
Standard flow rates up to 25 mL/minute for the Foxy R1, up to 125 mL/minute for the Foxy R2, with optional kits to increase or decrease the maximum
The Foxy R2 uses Radio Frequency Identification (RFID) technology to automatically detect the rack type without user intervention, to set collection patterns and vessel capacities
The Foxy R2 is available with a high flow rate (up to 1000 mL/min) diverter valve
Specifications (Click here):
Fraction Collectors, the Foxy® R1 and Foxy® R2 Multi-sample Automated
Specifications
Model:
Foxy R1
Foxy R2
Maximal flow rate standard: (mL/min)
25
125
Maximal flow rate optional kit: (mL/min)
25
Optional kit 25, optional high flow diverter valve 1000
Delay volume:
Diverter valve located at drop former, delay volume compensation only required for length of tubing to the diverter valve
Diverter valve located at drop former, delay volume compensation only required for length of tubing to the diverter valve
Peak detection:
Slope and/or level sense, with or without time window
Slope and/or level sense, with or without time window
Tube changes:
At detected peaks, plus drop counts, time, or external pump counts
At detected peaks, plus drop counts, time, or external pump counts
System control:
Front panel control via touch screen LCD, or by direct communication with fraction collector via Ethernet and RS-232 serial communications.
Front panel control via touch screen LCD, or by direct communication with fraction collector via Ethernet and RS-232 serial communications.
Inputs:
Pump counter, external peak, inject, tube advance, analog peak voltage
Pump counter, external peak, inject, tube advance, analog peak voltage
Outputs:
Pump pause, tube change
Pump pause, tube change
Power: (V/Hz)
100-117/50-60
100-117/50-60
Size: W×D×H (mm)
311×330×355
311×533×378
Weight with drip tray, no rack: (kg)
7.7
10.6
Number
Description
Price $
IS683870070
Foxy R1 One Rack Fraction Collector, includes fraction collector, diverter valve and one 13 mm tube rack
Inquire
IS682130100
Foxy R2 Two Rack Fraction Collector with RFID rack sensing, includes fraction collector, diverter valve and two 13 mm tube racks
Inquire
60-2139-032
Optional flow for Foxy R1, 125 mL/min kit, through 1/8 inch ID tubing
Inquire
69-2130-006
Optional flow for Foxy R2, 25 mL/min kit, through 1/16 inch ID tubing
Inquire
68-2130-007
Optional flow for Foxy R2, 1000 mL high flow diverter valve
Inquire
68-1613-293
Tris Three Channel Peristaltic Pump, 6 rollers per channel, 30 psi maximum per channel, 0 - 40 °C operating temperature, flow rate 0.5 - 150 mL/hr, 0.5 - 500 mL/hr, 210 mL/hr and 700 mL/hr per channel, depending on tubing size and whether in controlled mode or maximum mode
Inquire
69-2134-172
Cable to connect fraction collector to a Tris peristaltic pump, carries the pump count and pump pause signals
Inquire
69-2134-173
Cable to connect fraction collector to a UV-Vis detector such as the UA-6, carries the analog peak detector signal, tube advance, event pulse, external peak and inject signals
Inquire
69-2134-170
Cable to connect fraction collector to a non-Isco pump, six feet long, one end terminated as a 6-pin mini-DIN connector, the other stripped and tinned for connection to the external device
Inquire
68-1614-072
Tris pump cassette replacement assembly
Inquire
68-1617-017
Silicone tubing, 1/8 inch inside diameter, 6 m length
Inquire
68-1617-018
Silicone tubing, 1/16 inch inside diameter, 6 m length
Inquire
68-1617-025
Viton tubing, 1/8 inch inside diameter, 3 m length
Inquire
68-1617-023
Connectors for tubing, with nuts and ferrules, pkg/10
Inquire
60-2137-155
Rack for 12 mm diameter tubes, 144 per rack, stainless steel and polypropylene, electrically grounded when in place
Inquire
60-2137-150
Rack for 13 mm diameter tubes, 144 per rack, stainless steel and polypropylene, electrically grounded when in place
Inquire
60-2137-151
Rack for 16 mm diameter tubes, 100 per rack, stainless steel and polypropylene, electrically grounded when in place
Inquire
60-2137-152
Rack for 18 mm diameter tubes, 72 per rack,
Inquire
60-2137-153
Rack for 25 mm diameter tubes, 36 per rack stainless steel and polypropylene, electrically grounded when in place
Inquire
60-2137-154
Rack for 1.5 mL microcentrifuge tubes, 60 per rack, stainless steel and polypropylene, electrically grounded when in place
Inquire
60-2137-157
Rack for 50 mL centrifuge tubes, 36 per rack, stainless steel and polypropylene, electrically grounded when in place
Inquire
60-2137-156
Rack for 28 mm diameter scintillation vials, 36 per rack, stainless steel and polypropylene, electrically grounded when in place
Inquire
60-2137-159
Rack for 96-well microplates, 2 plates per rack, stainless steel and polypropylene, electrically grounded when in place
Inquire
60-2137-130
Rack for 96-well microplates, double space rack for Foxy R2 only, holds six plates
Inquire
60-2137-158
Rack for MiniVials, 72 per rack
Inquire
60-5247-004
Set of two racks for 480 mL glass bottles, for Foxy R2 only, each rack holds nine bottles, stainless steel and polypropylene, electrically grounded when in place
Inquire
60-2137-062
Case of 40 glass 480 mL bottles for racks #60-5247-004, nine bottles can be placed on the Foxy R1 drip tray, no rack required
Inquire
60-2137-161
Foxy R2 Preparative Rack with 26 ETFE or ECTFE funnels and 50 feet of 3/8 inch ID vinyl tubing
Inquire
60-2137-162
Foxy R2 Preparative Rack with 26 ETFE or ECTFE funnels and 50 feet of 3/8 inch ID FEP-lined tubing
Inquire
60-2137-163
Foxy R1 or R2 Preparative Rack with 36 ETFE or ECTFE funnels and 50 feet of 1/4 inch ID vinyl tubing
