Conductivity Sensors, Hamilton Conducell Low Conductivity, UPW, Standard and Broad Range

Overview

Conducell conductivity sensors measure the ability of a solution to conduct a current. The higher the concentration of ions in the solution, the higher the conductivity, which is measured in microSiemens (mS). Unlike pH that only measures the concentration of hydrogen ions, conductivity measurements take into account all the ionic species present.

Conductivity measurements can be used to determine the concentration of a solution provided the dissolved species are known but will not differentiate between acid and base. A common use of conductivity measurement is found in CIP (clean-in-place) systems utilized in pharmaceutical and food applications, where specific concentrations of the cleaning solution are critical to the process.

The Conducell conductivity sensors feature a variety of connection, material and technology options. Two-pole sensors are available in either a low cost solution (2DC-PG) or for accurate measurements of solutions with extremely low or high ionic strength (PWSE Arc PG, PWSE Arc TC). Four-pole sensors have measurement linearity over a large range, no polarization effects, and are less sensitive to coating from contaminated samples. Conducell 4USF conductivity sensors with stainless steel electrodes are the most common and suitable for many applications.

Hamilon Arc technology is available with the Conducell PWSE Arc PG, PWSE Arc TC, and 4USF Arc in 120, 215, 325 and 425 mm shaft lengths. Arc sensors provide a full online wireless option for monitoring, configuration and calibration.. The Arc system eliminates the external transmitter and communicates directly with the Process Control System

Features of the Conducell conductivity sensors:

Available 2-pole sensors for UHP water applications
Sensors available with PG 13.5, Tuchenhagen Varivent DN50/60, Neumo BIOConnect and Triclamp 1.5” process connection
All PEEK and EPDM materials exposed to medium are FDA approved
Cleaning in place (CIP) mode for all but 2DC-PG
Built in temperature sensor
Very easy to clean
Available Arc technology for wireless connectivity

Specifications (Click here):

Conductivity Sensors, Hamilton Conducell Low Conductivity, UPW, Standard and Broad Range

Specifications

Model:	PWSE Arc PG, TC	4USF Arc 120, 225, 325, 425	4USF PG, VV, BC	2DC-PG	4UHF-PG, 4UTF-PG	4US G125, T150-50, T150-100
Length: (mm)	120 (PG), 87 (TC)	120, 215, 325, 425	120 (PG)	120	120	37 (G125), 50 (T150-50), 100 (T150-100)
Accuracy at 25 °C: (%)	± 3	-	-	-	-	-
Accuracy at 1 µS/cm to 100 mS/cm: (%)	-	± 3	-	-	-	-
Accuracy at 100 mS/cm to 300 mS/cm: (%)	-	± 5	-	-	-	-
Analog interface 1:	4-20 mA for conductivity, programmable	4-20 mA for conductivity, programmable	-	-	-	-
Analog interface 2:	4-20 mA for conductivity, programmable	4-20 mA for conductivity, programmable	-	-	-	-
Analog interface 1 and 2	Galvanically not isolated, pulse width modulation 3.5 kHz	Galvanically not isolated, pulse width modulation 3.5 kHz	-	-	-	-
ATEX Certification:	No	No	CE 0035 II 1/2 G Ex ia IIC T4/T5/T6 (PG), no (VV), no (BC)	No	CE 0035 II 1/2 G Ex ia IIC T4/T5/T6	CE 0035 II 1/2 G Ex ia IIC T4/T5/T6
Autoclavable:	Yes	Yes, maximum temperature 130 °C	Yes	Yes	Yes	No
Baud rate: (bd)	4800, 9600, 19200, 38400, 57600, 115200	4800, 9600, 19200, 38400, 57600, 115200	-	-	-	-
Cell constant: (per cm)	< 0.1	0.36	0.36	1	0.36	0.147
Certificate:	Nominal (Arc PG) and Actual cell constant	Nominal (Arc 120) and Actual cell constant	Nominal and actual cell constant	No	Nominal and actual cell constant	Nominal and actual cell constant
Cleaning in place mode (CIP):	Yes	Yes	Yes	No	Yes	Yes
Configurable values, conductivity:	µS/cm, mS/cm	µS/cm, mS/cm	-	-	-	-
Configurable values, temperature:	°C, °F, K	°C, °F, K	-	-	-	-
Diameter: (mm)	12 (PG), 19 (TC)	12	12	12	12	25 (G125), 24 (T150-50), 24 (T150-100)
Digital RS485 interface:	Modbus RTU, maximum 31 addresses	Modbus RTU, maximum 31 addresses	-	-	-	-
Electrical connector:	VP 8	VP 8	VP 6	5 m Open End	VP 6	5 m Open End
Measurement principle:	2-pole contacting	4-pole contacting	4-pole contacting	2-pole contacting	4-pole contacting	4-pole contacting
Measuring range: (µS/cm)	0.1 – 2000	-	-	-	-	-
Measuring range: (µS/cm to mS/cm)	-	1 to 300	1 to 500	-	1 to 500	1 to 500
Medium affected materials:	PEEK (FDA approved), stainless steel, EPDM (FDA approved	PEEK (FDA approved), stainless steel, EPDM (FDA approved)	PEEK (FDA approved), stainless steel, EPDM (FDA approved)	Plastic, graphite, EPDM (FDA approved)	PEEK (FDA approved), Hastelloy C (4UHF), Titanium (4UTF), EPDM (FDA approved)	PEEK (FDA approved), stainless steel, EPDM (FDA approved)
OP: (mm)	-	-	-	-	-	22 to 55 (G125)
Monitoring of sensor quality:	Yes	-	-	-	-	-
Monitoring ultra-pure water (USP 645):	2 alarm outputs, Umax 40 V, Imax 15 mA, Pmax 50 mW	-	-	-	-	-
Operating temperature range: (°C)	Analog interface 0 to 110, Digital interface 0 to 130	Analog interface 0 to 110, Digital interface 0 to 140	-20 to 150	-5 to 80	-20 to 150	20 to 135
O-ring material:	EPDM (FDA approved)	EPDM (FDA approved)	EPDM (FDA approved)	EPDM (FDA approved)	EPDM (FDA approved)	EPDM (FDA approved)
Pressure range: (bar)	0 to 10 at 130°C	0 to 20 at 130°C	0 to 20 at 135 °C, 0 to 10 at 150 °C	0 to 6	0 to 20 at 135 °C, 0 to 10 at 150 °C	0 to 6
Process connection:	PG 13.5 (PG), Triclamp 1.5” (TC)	PG 13.5	PG 13.5 (PG), Tuchenhagen Varivent DN50/60 (VV), Neumo BIOConnect (BC)	PG 13.5	PG 13.5	G 1-1/4” (G125), Triclamp 1.5” (T150-50), Triclamp 1.5”
Steam sterilizable:	Yes	Yes, maximum temperature 140 °C	Yes	no	Yes	Yes
Temperature sensor:	NTC 22 kOHM	NTC 22 kOHM	Pt1000	Pt1000	Pt1000	Pt1000

Number	Description	Price $
242730	Conducell PWSE Arc PG 13.5 2-pole conductivity sensor, for liquids with very low conductivity such as ultra-pure water, only available with Arc technology, process connection PG 13.5, electrical connector VP 8, 12 mm Ø, length 120 mm	Inquire
242720	Conducell PWSE Arc TC 1.5 2-pole conductivity sensor, for liquids with very low conductivity such as ultra-pure water, only available with Arc technology, process connection Triclamp 1.5”, electrical connector VP 8, 19 mm Ø, length 87 mm	Inquire
237610	Conducell 2DC-PG, simple 2-pole or 2 electrode sensor, best for clean solutions and non-critical applications, process connection PG 13.5, electrical connector 5 m open end, 12 mm Ø, length 120 mm	Inquire
242159	Conducell 4USF Arc 120, 4-pole conductivity sensor designed to be used in various sensor housings for process connection, process connection PG 13.5, electrical connector VP 8, very good linearity over a broad range of conductivities, can tolerate some contamination, 12 mm Ø, length 160 mm	Inquire
242160	Conducell 4USF Arc 225, 4-pole conductivity sensor designed to be used in various sensor housings for process connection, process connection PG 13.5, electrical connector VP 8very good linearity over a broad range of conductivities, can tolerate some contamination, 12 mm Ø, length 215 mm	Inquire
242161	Conducell 4USF Arc 325, 4-pole conductivity sensor designed to be used in various sensor housings for process connection, process connection PG 13.5, electrical connector VP 8, very good linearity over a broad range of conductivities, can tolerate some contamination, 12 mm Ø, length 325 mm	Inquire
242162	Conducell 4USF Arc 425, 4-pole conductivity sensor designed to be used in various sensor housings for process connection, process connection PG 13.5, electrical connector VP 8, very good linearity over a broad range of conductivities, can tolerate some contamination, electrical connector VP 8, 12 mm Ø, length 425 mm	Inquire
237620	Conducell 4USF-PG 120, 4-pole conductivity sensor suited for hygienic applications, withstands CIP cleanings and autoclaving, process connection PG 13.5, electrical connector VP 6, good linearity over a broad range of conditions, 12 mm Ø, length 120 mm	Inquire
237627	Conducell 4UHF-PG 120, 4-pole conductivity sensor suited for hygienic applications, withstands CIP cleanings and autoclaving, medium affected materials PEEK, EPDM, Hastelloy C, process connection PG 13.5, electrical connector VP 6, good linearity over a broad range of conditions, 12 mm Ø, length 120 mm	Inquire
237630	Conducell 4UTF-PG 120, 4-pole conductivity sensor suited for hygienic applications, withstands CIP cleanings and autoclaving, medium affected materials PEEK, EPDM, titanium, process connection PG 13.5, electrical connector VP 6, good linearity over a broad range of conditions, 12 mm Ø, length 120 mm	Inquire
237640	Conducell 4USF-VV, 4-pole conductivity sensor suited for hygienic applications, withstands CIP cleanings and autoclaving, process connection Tuchenhagen Varivent DN50/60, electrical connector VP 6, good linearity over a broad range of conditions, 12 mm Ø	Inquire
237650	Conducell 4USF-BC, 4-pole conductivity sensor suited for hygienic applications, withstands CIP cleanings and autoclaving, process connection Neumo BIOConnect, electrical connector VP 6, good linearity over a broad range of conditions, 12 mm Ø	Inquire
237700-OP	Conducell 4US-G125, 4-pole conductivity sensor with various O-ring positions, process connection G 1-1/4”, electrical connector 5 m open end, good linearity over a broad range of conductivities, 25 mm Ø, length 37 mm	Inquire
237750	Conducell 4US-T150-50, 4-pole conductivity sensor with various O-ring positions, process connection Triclamp 1.5”, electrical connector 5 m open end, good linearity over a broad range of conductivities, 24 mm Ø, length 50 mm	Inquire
237760	Conducell 4US-T150-100, 4-pole conductivity sensor with various O-ring positions, process connection Triclamp 1.5”, electrical connector 5 m open end, good linearity over a broad range of conductivities, 24 mm Ø, length 100 mm	Inquire
242411	USB-MedBus RS 485 converter, to connect with a PC	78.20
355194-03	Demo cable VP 8 for demonstration of Arc sensors, with power supply, device end open, NA plug, 1 m	Inquire
242180	Arc View Handheld and Dock, communicate with up to 31 sensors wirelessly, or hard wire to one sensor through dock, monitor, calibrate, and configure	Inquire
242176	Arc Sensor Cable with MS 4-pole socket, for sensor connection to Arc View Handheld Dock, 1 m	Inquire
242170	Arc Wi Sensor Adapter, is mounted between the VP head of an Arc sensor and a VP sensor cable, provides wireless communication with the Arc View Handheld	Inquire
355108	Sensor cable VP6, single coaxial, device side no connector (open end), I m	Inquire
355109	Sensor cable VP 6, single coaxial, device side no connector (open end), 3 m	Inquire
355110	Sensor cable VP 6, single coaxial, device side no connector (open end), 5 m	Inquire
355111	Sensor cable VP 6, single coaxial, device side no connector (open end), I0 m	Inquire
355112	Sensor cable VP 6, single coaxial, device side no connector (open end), 20 m	Inquire
355217	Sensor cable VP8, double coaxial, device side no connector (open end), I m	Inquire
355218	Sensor cable VP 8, double coaxial, device side no connector (open end), 3 m	Inquire
355219	Sensor cable VP 8, double coaxial, device side no connector (open end), 5 m	Inquire
355220	Sensor cable VP 8, double coaxial, device side no connector (open end), I0 m	Inquire
355221	Sensor cable VP 8, double coaxial, device side no connector (open end),I5 m	Inquire
355222	Sensor cable VP 8, double coaxial, device side no connector (open end), 20 m	Inquire
237931	Flow through cell PEEK TC 1.5”, facilitates insertion of Conducell 4US-T150-50 in pipework	Inquire
237331-OP	FlexiFit Bio housing, G 1-1/4”, for 120 mm sensors, 0-6 bar pressure range, -10 to 140°C temperature range, PG 13.5, suitable for autoclaving, CIP and SIP procedures	Inquire
237380-OP	FlexiFit U Bio housing, G 1-1/4”, for 120 mm sensors, 0-6 bar pressure range, -10 to 140°C temperature range, PG 13.5, suitable for autoclaving, CIP and SIP procedures	Inquire
237341	FlexiFit TC 150-33 housing, TC 1.5”, for 120 mm sensors, 0-6 bar pressure range, -10 to 140°C temperature range, PG 13.5, suitable for autoclaving, CIP and SIP procedures	Inquire
237344	FlexiFit VV-0 housing, Varivent, for 120 mm sensors, 0-6 bar pressure range, -10 to 140°C temperature range, PG 13.5, suitable for autoclaving, CIP and SIP procedures	Inquire
237345	FlexiFit VV-15 housing, Varivent, for 120 mm sensors, 0-6 bar pressure range, -10 to 140°C temperature range, PG 13.5, suitable for autoclaving, CIP and SIP procedures	Inquire

Rapid Response	or call Rose Scientific toll free at 1.888.249.4074
Send us an email message outlining any request and we will get back to you with the details!
Contact me	*Send information*	Quote request

Your name	Your email	Your telephone number