Incubators, Memmert INCOmed CO2 Models INC108med, INC153med, INC246med and INC108ivf
Overview
The Memmert INCOmed CO2 Incubators will grow and safely protect biological samples in controlled and ideal environments.
Alarm functions, three-fold over-temperature protection and simultaneous display of all parameters provide safety for samples and cultures in medicine, life science, environmental technology, bacteriology, virology, biology, biotechnology and zoology.
Especially for in-vitro fertilization, the precision and reliability of a CO2 incubator are of crucial importance, as the slightest deviation in the CO2 atmosphere, temperature or humidity content during cultivation can affect cell development. Memmert INCOmed CO2 models are classified as Class IIa medical devices and comply with the essential safety requirements of the European Medical Devices Directive 93/42/EEC.
The state-of-the-art control technology is based on Memmert’s Perfect performance class.
The basic standard incubator models INCmed108, INCmed153, and INCmed246 can be expanded by additional optional modules.
Comfort module: Two gas connections with quick release connectors, automatic switch-over between gas bottles
Communication module: USB interface, Memmert Celsius standard software for programming and logging, ring memory, printer port
CO2 module: Extended CO2 range from 0 to 20%
Humidity module: Active microprocessor humidification and dehumidification control (40-97% rh)
O2 module: Control of oxygen concentration through the introduction of nitrogen, setting range from 1% to 20% O2 (a combination of the comfort module and the O2 module not possible, since the N2 introduction takes place via the second gas bottle connection)
INCOivf for in vitro fertilization, includes 8 separate slide in units for Petri dishes that can only be opened one at a time, to keep recovery times to a minimum, active humidity control to eliminate condensation and to minimize vaporization in chamber so that additional incubation under oil is not required, INC108med only
Proven Memmert technology in heating the inner chamber from all six sides, along with the electronic humidity limit control, prevents condensation from forming in the inner chamber, while offering maximum protection to cell cultures. An aluminum thermal conductive layer supports optimum temperature distribution, and serves as a heat accumulator in case of a temporary power failure. The turbulence-free chamber ventilation insures a constant and uniform atmosphere.
Each INCOmed CO2 incubator has a double locking fully insulated stainless steel door and an inner glass door with an 8 mm diameter opening to take gas samples.
Features of the INCOmed CO2 Incubators:
Three model sizes, 108L, 153L and 246L
Temperature range up to +50°C
Standard integrated humidity limit control (88 – 97$ rh)
Inner chamber, including all fittings and sensors, can be sterilized at +160°C with a four hour program, using the standard STERIcard
Integral fault diagnostics on temperature, CO2 and humidity limit control
Digital 7-day-program-timer with real time clock, precise minute setting
LED digital display of all set parameters, such as temperature, weekdays, time, CO2, humidity and set-up values
CO2-supply via sterile filter, automatically cut off upon door opening
Digital electronic CO2 control, range of adjustment 0-10%
Intrinsic adjustment of altitude above sea level
As much function as necessary, as much individuality as possible! Contact Rose Scientific to custom design the Memmert CO2 Incubator Model INC108med, INC153med, or INC246med that does what it needs to do with the resources available.
The ordering number is assembled from the catalog numbers of the various options at the time INCOmed CO2 incubator model is ordered.
Memmert supplies a 3 year guarantee on appliances, not including parts subject to wear and tear.
Specifications (Click here):
Incubators, Memmert INCOmed CO2 Models INC108med, INC153med, INC246med and INC108ivf
Specifications
Model:
INC108med
INC153med
INC246med
Internal volume: (L)v
108
153
246
Digital program timer with real time clock:
7-day
7-day
7-day
Digital display parameters:
Temperature, weekday, time, CO2, humidity, setup values
Temperature, weekday, time, CO2, humidity, setup values
Temperature, weekday, time, CO2, humidity, setup values
Temperature range: (°C)
+ 20 (at least 8 above ambient) to + 50,
+ 20 (at least 8 above ambient) to + 50,
+ 20 (at least 8 above ambient) to + 50,
Sterilization fixed temperature, time: (°C, h)
160, 4
160, 4
160, 4
Temperature variation in time: (°C)
± 0.1
± 0.1
± 0.1
Temperature uniformity in chamber at 37(°C): (°C)
± 0.3
± 0.3
± 0.3
Temperature adjustment precision: (°C)
0.1
0.1
0.1
Pt100 temperature sensors:
2
2
2
Over temperature protection:
Triple protection. Including one mechanical
Triple protection. Including one mechanical
Triple protection. Including one mechanical
Under temperature protection:
Digitally adjustable, Memmert ASF sounds an alarm
Digitally adjustable, Memmert ASF sounds an alarm
Digitally adjustable, Memmert ASF sounds an alarm
CO2 alarm:
CO2, open door, empty cylinder
CO2, open door, empty cylinder
CO2, open door, empty cylinder
Integral fault diagonsitics:
temperature, CO2, humidity
temperature, CO2, humidity
temperature, CO2, humidity
Humidity limit control adjustment range (without Humidity module): (% rh)
88 to 97
88 to 97
88 to 97
Humidity limit control adjustment range (with Humidity module): (% rh)
40 to 97
40 to 97
40 to 97
Maximum humidity variation (time): (% rh)
± 1
± 1
± 1
Humidity adjustment precision: (% rh)
± 1
± 1
± 1
CO2 adjustment range (without CO2 module): (%)
0 to 10
0 to 10
0 to 10
CO2 adjustment range (with CO2 module): (%)
0 to 20
0 to 20
0 to 20
Maximum CO2 variation (time): (%)
± 0.1
± 0.1
± 0.1
Maximum CO2 uniformity (volume): (%)
± 0.3
± 0.3
± 0.3
CO2 adjustment precision: (%)
0.1
0.1
0.1
CO2 supply:
via sterile filter
via sterile filter
via sterile filter
CO2 shutoff upon door opening:
yes
yes
yes
O2 (only with O2 module) adjustment range: (%)
1 to 20
1 to 20
1 to 20
With O2 module maximum O2 variation (time): (%)
± 0.1
± 0.1
± 0.1
With O2 module maximum O2 uniformity (volume): (%)
± 0.3
± 0.3
± 0.3
O2 adjustment precision (only with O2 module): (%)
0.1
0.1
0.1
Ambient temperature: (°C)
5 to 35
5 to 35
5 to 35
Maximum humidity: (%)
80 non condensing
80 non condensing
80 non condensing
Supplied shelves:
2
3
3
Supplied water trays:
1
1
2
Intrinsic adjustment of altitude above sea level:
yes
yes
yes
Calibration facility, number of points for temperature:
3 freely selectable
3 freely selectable
3 freely selectable
Calibration facility, humidity: (%)
20 and 90
20 and 90
20 and 90
Calibration facility CO2: (%)
5, 7, 10
5, 7, 10
5, 7, 10
Program stored in case of power failure:
yes
yes
yes
Maximum number of shelves:
4
6
6, or 2 x 6 half width
Load per shelf/per unit: (kg)
15/40
15/40
15/60
Outer doors:
Lockable stainless steel insulated
Lockable stainless steel insulated
Lockable stainless steel insulated
Inner doors:
Glass with 8mm Ø gas sample port
Glass with 8mm Ø gas sample port
Glass with 8mm Ø gas sample port
Interior dimensions: W x D x H (mm)
560 x 400 x 480
480 × 500 × 640
640 x 600 x 640
Exterior dimensions (D not including 38mm handle): W x D x H (mm)
710 x 550 x 778 (H varies due to adjustable feet)
630×650×938 (H varies due to adjustable feet)
790×750×938 (H varies due to adjustable feet)
Power: (V,Hz)
230, 50/60
230, 50/60
230, 50/60
Weight: (kg)
70
90
110
Number
Description
Price $
INC108med
Standard Delivery CO2 Incubator Model INC108med, 108 L capacity,115V, exterior dimensions (WxDxH) 710×550×778mm, interior dimensions 560×400×480mm, 70kg, 2 shelves provided, 4 shelves maximum
Inquire
INC153med
Standard Delivery CO2 Incubator Model INC153med, 153 L capacity,115V, exterior dimensions (WxDxH) 630×650×938mm, interior dimensions 480×500×640mm, 90kg, 3 shelves provided, 6 shelves maximum
Inquire
INC246med
Standard Delivery CO2 Incubator Model INC246med, 246 L capacity, 115V, exterior dimensions (WxDxH) 790×750×938mm, interior dimensions 640×600×640mm, 110kg, 3 shelves provided, 6 or 2×6 half shelves shelves maximum
Inquire
INC108ivf
In vitro fertilization module for INC108med, includes 8 separate slide in units for Petri dishes that can only be opened one at a time, to keep recovery times to a minimum, active humidity control to eliminate condensation and to minimize vaporization in chamber so that additional incubation under oil is not required, can be removed for cleaning
Inquire
T1
Comfort module, includes two gas connections with quick release connectors and automatic switch-over of gas cylinders Inquire
T2
Hygiene module includes electropolished interior seamlessly welded by laser
Inquire
T3
Communication module includes USB interface, Memmert Celsius standard software for programming and logging, ring log memory and printer interface
Inquire
T4
CO2 module extends CO2 range from 0 to 20% instead of 0 to 10%
Inquire
T5
Premium module includes Comfort, Hygiene, Communication and CO2 modules
Inquire
K7
Humidity module provides active microprocessor control for humidifying and dehumidifying (40-97% rh), including digital indication and auto-diagnostic system to insure even more rapid reaching of set humidity and very short recovery times while avoiding condensate formation, humidity supply with distilled water (from an external tank) by a self-priming pump, integral bacteria block by generating hot steam, dehumidifying via sterile filter (standard humidity limit control and water dishes are omitted), can only be ordered together with a new incubator (no retrofitting possible)
Inquire
T6
O2 module provides for control of oxygen concentration by N2 inlet; adjustment range 1% up to 20% O2 (not possible in combination with Comfort or Premium modules)
Inquire
F7-Si
Entry port in the rear (optional location), can be closed with silicone stopper, 40 mm inner diameter, moisture tight
Inquire
K4
4-part partitioning of interior with gas baffle (replacement of 3 full-width by 6 half-width shelves), INC246med
Inquire
B8
Door-hinges on left side
Inquire
G3
Stacking version for 2 ovens of equal size (foot locators for bottom oven modification)
Inquire
H5
Potential-free contact (24V/2A) with socket 3 pin, according to NAMUR NE 28 for external monitoring (set point of temperature and CO2 is reached)
Inquire
D00106
Works calibration certificate for 5 %, 7 % and 10 % CO2 (measured at +37°C)
Inquire
K9
Start-up of INCO incubators and brief training (D, A, CH only), through MEMMERT service, not subject to discount
Inquire
B00325
Additional perforated stainless steel shelf, full width, holes of 10mm Ø, for INC108med
Inquire
B00321
Additional perforated stainless steel shelf, full width, holes of 10mm Ø, for INC153med
Inquire
B03813
Additional perforated stainless steel shelf, full width, holes of 10mm Ø, for INC246med
Inquire
B02742
Additional perforated stainless steel shelve, half width, for INC246med
Inquire
E20165
Additional stainless steel grid, full width, for INC106med
Inquire
E20166
Additional stainless steel grid, full width, for INC153med
Inquire
B03492
Additional stainless steel grid, full width, for INC246med
Inquire
B02787
Additional water dish, for INC106med, 40mm depth
Inquire
B02784
Additional water dish, for INC153med, 40mm depth
Inquire
B02786
Additional water dish, half width, for INC246med, 40mm depth
Inquire
B02792
Subframe, 622 mm high, for INC106med
Inquire
B02732
Subframe, 622 mm high, for INC153med
Inquire
B02793
Subframe, 622 mm high, for INC246med
Inquire
B02794
Subframe, 130 mm (adjustable to 150 mm) height for 2 stacked incubators, INC106med
Inquire
B02740
Subframe, 130 mm (adjustable to 150 mm) height for 2 stacked incubators, INC153med
Inquire
B02795
Subframe, 130 mm (adjustable to 150 mm) height for 2 stacked incubators, INC246med
Inquire
B04459
HEPA-filter for chamber according to EN 1822, packed in sterile condition, including fixing unit
Inquire
E00437
STERICard (additional or as replacement) for automatic chamber sterilization cycle (not for sterilizing load)
Inquire
E02087
Pressure reducing valve DIN 8546, including gas cylinder monitor
Inquire
B03881
CO2 connection set, hose with coupling and clamp
Inquire
B04712
Module for external fresh water supply, only in combination with humidity module
