| Number | Description | Price $ |
| 1000069 |
Bosshead clamp, chrome plated, for rod diameters from 5 to 17 mm
 |
14.77 |
| 1001460 |
Bosshead Mini clamp, chrome plated, for rod diameters from 5 to 12 mm
 |
11.89 |
| 5057022 |
Bosshead XL clamp, maximum opening, for rod diamters from 13 to 32 mm
 |
335.92 |
| 7000408 |
Bosshead Maxim clamp, for large diameters, chrome plated, with one opening to hold rod diameters up to 30 mm, and a second openning to hold rod diameters up to 20 mm
 |
75.83 |
| 5900600 |
Bosshead Suntech clamp, for retort bars of diameters from 5 to 22 mm, with screw clamp joints. Ideal for supporting overhead stirrers.
 |
51.10 |
| 7204055 |
Bosshead Pass clamp, original Phywe, for joining and clamping multipurpose round or rectangular rods up to 12 mm across. For cross T and parallel arrangements.
 |
66.08 |
| 7000531 |
Bosshead Girofix clamp, chrome plated with swivel toothed clamp for holding rods at any angle, for rod diameters from 5 to 15 mm. Conforms to DIN standard 12895-E16.
 |
54.19 |
| 1001461 |
Bosshead Medi clamp, chrome plated, for rods of diameter 5 to 20 mm
 |
31.37 |
| 1001462 |
Bosshead Medi clamp, anodized black, for rods of diameter 5 to 20 mm
 |
31.37 |
| 6000896 |
Bosshead for Thermometers clamp provides support for thermometers in water and oil baths with locking screw handling up to 40 mm thickness, for thermometer rod diameters up to 7 mm.
 |
116.20 |
| 6000036 |
Bosshead clamp for Thermometers, swivel bosshead and press lock, made of AISI 304 stainless steel, for thermometer rod diameters from 6 to 15 mm, 90 mm length.
 |
40.44 |
| 1000037 |
Bosshead clamp for Thermometers with hook end for a thermometer, chrome plated, 90 mm length.
 |
26.02 |
| 7000181 |
Bosshead Duplex with Double Burette clamp, self adjusting clamp for two burettes with central bosshead screw. Made of chrome plated metal with PVC coated jaws, 170 mm span, Allows complete visibility of burette scales while being held.
 |
71.75 |
| 7005211 |
Bosshead Trips with Burette and Tube clamp, made of chrome plated metal for diameters from 4 to 20 mm, 70 mm length.
 |
20.09 |
| 7000251 |
Bosshead clamp with Automatic Spring Loaded clamp for burettes and thermometers, made of chrome plated metal with spring clamp jaw accepting diameters from 4 to 20 mm, 70 mm length.
 |
23.95 |
| 7000140 |
Bosshead clamp with Burette and Tube clamp, chrome plated and PVC coated double prong jaws, for rod diameters from 7 to 25 mm, 75 mm length.
 |
31.54 |
| 7000141 |
Bosshead clamp for Condensers, swivel clamp with PVC coated double prong jaws, for rod diameters from 12 to 45 mm, 110 mm length.
 |
38.75 |
| 7000404 |
Bosshead Minimax clamp with universal swivel clamp, for rod diameters to 80 mm, 110 mm length.
 |
48.61 |
| 1000011 |
Bosshead P Type clamps, made of nickel alloy, for fixing perpendicular structures, Rod diameter 12 mm.
 |
38.38 |
| 1000111 |
Allen hex key, suitable for P type bosshead clamps
 |
4.25 |
| 7008133 |
Bosshead Trevinge clamp, chrome plated Dural alloy. Because of its strength can be used for multilevel and 3 dimensional constructions. For rod diameters of 9 to 13 mm.
 |
11.36 |
| 7008253 |
Bosshead Trevinge clamp, chrome plated Dural alloy. Because of its strength can be used for multilevel and 3 dimensional constructions. For rod diameters of 19 to 25 mm.
 |
21.92 |
| 4010LC |
Spherical slotted lattice connectors, cast aluminum, U-shaped slots on each side take standard 1/2 inch rod, axial hole permits rods to be joined at right angles in the same plane, open U slots allow addition or removal of rods without disturbing whole structure, set screws are flush when tightened, package includes Allen wrench, pkg/12
 |
79.28 |
| 4010SF |
Support feet of non-ferrus alloy, two inches Ø, 16mm high, with set screw for fastening lattice frame rods, each foot has four holes for attaching to bench, floor or wall, mounting screws not included, pkg/10
 |
82.31 |
| 1394855 |
Bosshead Pass Benchclamp, original Phywe, Clamps to the bench while holding rods with diameters from 4 to 12 mm. Bench top width up to 40 mm.
 |
80.62 |
| 6000879 |
Bosshead, chromeplated clamp, with circular support platform to support flat bottom vessels and instruments. Plate diameter 80 mm, length from clamped support rod to center of platform 85 mm.
 |
40.50 |
| 6000880 |
Bosshead, chromeplated clamp, with circular support platform to support flat bottom vessels and instruments. Plate diameter 150 mm, length from clamped support rod to center of platform 170 mm.
 |
44.13 |
| 7000506 |
Bosshead clamp, with open ring support made of galvanized metal. Ring diameter 60 mm, usable length A (from clamped support rod to center of ring) 100 mm.
 |
21.19 |
| 7000508 |
Bosshead clamp, with open ring support made of galvanized metal. Ring diameter 80 mm, usable length A (from clamped support rod to center of ring) 130 mm. |
22.44 |
| 7000536 |
Bosshead clamp, with closed ring support made of galvanized metal. Ring diameter 60 mm, usable length A (from clamped support rod to center of ring) 100 mm.
 |
21.19 |
| 7000538 |
Bosshead clamp, with closed ring support made of galvanized metal. Ring diameter 80 mm, usable length A (from clamped support rod to center of ring) 130 mm. |
22.44 |
| 7005310 |
Bosshead clamp, with closed ring support made of galvanized metal. Ring diameter 100 mm, usable length A (from clamped support rod to center of ring) 160 mm. |
25.47 |
| 7005312 |
Bosshead clamp, with closed ring support made of galvanized metal. Ring diameter 120 mm, usable length A (from clamped support rod to center of ring) 170 mm. |
26.75 |
| 7005314 |
Bosshead clamp, with closed ring support made of galvanized metal. Ring diameter 140 mm, usable length A (from clamped support rod to center of ring) 180 mm. |
28.32 |
