Orbital Shakers, INFORS Celltron, Gentle Drive for use in CO2 Incubators
Overview
The Infors Celltron Orbital Shaker is specifically designed and built to perform in CO2 incubators. The Celltron has minimal power consumption of 4 watts, which means that it does not dump large amounts of heat into the incubator, so temperatures are not disrupted.
While the Celltron is inside the CO2 incubator the magnetic touch controller is outside, allowing the user to always get an overview of the operational status. The controller and the Celltron are connected with a flat cable that slips between the incubator door seals.
The Celltron is made to operate in the environment typical of a CO2 incubator. It also has an antimicrobial surface and is constructed of materials that will not rust, corrode or break down after lengthy use.
An Infors Sticky Stuff adhesive mat enables the ATF Universal Platform of the Celltron to be used flexibly with various flask sizes. Even adhesion at temperatures less than 60 °C, without the need for flask clamps. A universal platform without Sticky Stuff and Flask clamps are also available if needed, as well as dedicated trays, trays with roller clamps and trays with holders for microtiter plates.
Features of the Celltron Orbital Shaker:
Gentle and reliable magnetic drive, no drive belt, developed specifically for cell cultures, with snooth start and stop
Minimal heat emission, so it does not disrupt temperature control in the incubator.
Intuitive touch controller with timer function
Range of options for trays and fittings
Antimicrobial surface, silver based.
Corrosion resistant, made of ABS plastic and stainless steel
Specifications (Click here):
Orbital Shakers, INFORS Celltron, Gentle Drive for use in CO2 Incubators
Specifications
Model:
Celltron Orbital Shaker
Drive:
Magnetic, beltless, watertight
Shaking Speed: (rpm)
20 - 200
Orbital Throw: (mm)
25
Accuracy: (%)
± 1 of maximum speed
Temperature range: (ºC)
+4 to 60 (Touch Controller to 45)
Humidity: (%)
Up to 98 non-condensing (Touch Controller to 60)
Load Capacity: (kg)
3.5
Dimensions: W×D×H (mm)
380 × 450 × 90
Power: (V,Hz, W)
115, 60, 14
Loading Capacity, Erlenmeyer flasks: (mL, n)
(50, 35), (100, 23), (250,12), (500, 8), (1000,5)
Loading Capacity, Fernbach flasks: (mL, n)
(2800, 1)
Number
Description
Price $
I69222
Infors Celltron Orbital Shaker for CO2 Incubators, 115 Volt, 60Hz
7,630.25
I69455
Celltron Platform with Sticky-Mat, 370 × 300 mm
931.50
63240
Infors Sticky Stuff, 20 cm × 20 cm, Single Sheet adhesive sticky mat
145.00
31274
Steel Flask Clamp, 25 ml, ATW platform holds 48
29.00
31279
Steel Flask Clamp, 50 ml, ATW platform holds 35
33.00
31271
Steel Flask Clamp, 100 ml, ATW platform holds 23
38.00
31275
Steel Flask Clamp, 250 ml, ATW platform holds 12
48.00
31280
Steel Flask Clamp, 500 ml, ATW platform holds 8
56.00
31272
Steel Flask Clamp, 1000 ml, ATW platform holds 5
79.00
IN-TUBE
Various test tube racks punched gaskets of foam rubber, tubes are held vertically or at an adjustable angle, designed for incubation of cultures in test tubes or Falcon tubes, can be used on universal screw down platform or Sticky Stuff platform.
