The Infors-HT Multitron Pro has every advantage for high throughput laboratories and for institutions with limited space. These stackable shaking incubators allow for as many as three units to be stacked vertically in a manner that is still accessible to all laboratory staff.
The ingenious design of the Infors shakers features a front-loading pullout platform, stainless steel interior panels, panoramic front window and inspection light. The patented drive system provides uniform motion and quiet operation without vibration. The sealed cabinet ensures fast and accurate heating. Refrigeration, humidity and CO2 control are available, as well as a variety of lighting options.
All cabinets incorporate an independent control and power system, with redundant control of speed, temperature, lights, humidity and CO2. This new feature allows existing cabinets to be easily upgraded to a stacked system that saves valuable floor space.
The Infors-HT Multitron Pro shaking incubators are designed and built to superb standards to perform reliably for long periods with continuous use. They are commonly used for the culture of bacteria, fungi, yeast and photosynthetic active organisms, and can serve in a long list of applications including parallel cultivation, screening, protein expression, media development, scale up, process development and optimization, biofuels and mini or maxi preps in molecular biology.
The proven triple eccentric drive system insures quiet and maintenance free operation. The Infors Sticky-Mat enables the Universal Platform to be used with various flask sizes without the need of flask clamps, saving money and valuable time. In addition to the large traditional universal platform with screw holes for flask and test tube racks, there is also a platform for micro-titer and deep well plates.
The Multitron Pro can be fitted with a host of options tailered to applications, such as CO2, lighting for photosynthesis or phototropic organism, humidity control, refrigeration, higher temperature and many other options. ShakerBag disposable bag and gassing options available.
Please call Rose Scientific for any special requirement and we would be happy to customize a system for you.
Features of the Multitron Pro:
Single, Double or Triple Stacked Units are available
Door opens flat down allowing all units to be accessible simultaneously
Triple eccentric drive system for reliable and quiet operation
Digital display of Shaking Speed and Time
Programmable individually or from a Master unit
Large universal platform 850 mm × 470 mm
Rinse down is possible in case of spill
The Multitron can be custom configured with many options
Refrigerated units are available with Side Cooling or Top Cooling
A high temperature model is also available for thermophiles
Variable speed of up to 400 rpm
Numerous safety features
Specifications (Click here):
Shaking Incubators, INFORS Multitron Pro Stacking
Specifications
Model:
Infors Multitron Pro Shaking Incubators
Drive Unit:
Brushless AC induction motor with drive belt
Shaking Speed: (rpm)
20 – 400, depends on load and stack
Orbital Throw: (mm)
25 (Standard) or 50
Temperature Range (Non- Refrigerated): (°C)
6 above ambient to 80, but typically to 65
Temperature Range (Refrigerated, side mounted): (°C)
20 below ambient to 80, but typically to 65
Temperature Range (Refrigerated, top mounted): (°C)
12 below ambient to 80, but typically to 65
Temperature Accuracy: (°C)
± 0.2
Standard parameters:
Temperature and speed
Optional parameters:
Cooling, illumination, humidification, CO2 control
ATM Universal Platform for use with Flask Clamps, 850 mm × 470 mm
1,995.00
31289
ATM Universal Platform with INFORS Sticky Stuff adhesive mat, Large 850 mm × 470 mm
2,495.00
63240
INFORS Sticky Stuff, 20 cm × 20 cm. Single Sheet adhesive sticky mat, 8 required to cover Universal Platform ATM
145.00
OPTIONS
Please contact us for details on side cooling units, 50 mm Orbit Units, or units with options such as CO2, Humidity, Lighting, and a wide variety of other choices
Inquire
IN-TRAYS
Fixed clamp trays, trays with holders for microtiter plates and trays with roller clamps are available
Inquire
31274
Steel Flask Clamp, 25 mL, ATM platform holds 197
29.00
31279
Steel Flask Clamp, 50 mL, ATM platform holds 131
33.00
31271
Steel Flask Clamp, 100 mL, ATM platform holds 87
38.00
31275
Steel Flask Clamp, 250 mL, ATM platform holds 48
48.00
31280
Steel Flask Clamp, 500 mL, ATM platform holds 31
56.00
31272
Steel Flask Clamp, 1000 mL, ATM platform holds 19
79.00
31273
Steel Flask Clamp, 2000 mL, ATM platform holds 13
91.00
31277
Steel Flask Clamp, 3000 mL, ATM platform holds 9
101.00
31278
Steel Flask Clamp, 4000 mL, ATM platform holds 8
111.00
31281
Steel Flask Clamp, 5000 mL, ATM platform holds 6
131.00
IN-EVAP
Anti-evaporation box holds 18 microtiter or 12 deep well plates, the Minitron takes one, can provide sterile environment, reduces evaporation losses
Inquire
IN-TUBE
Various test tube racks, punched gaskets of foam rubber, tubes are held vertically or at an adjustable angle, designed for incubation of cultures in test tubes or Falcon tubes, can be used on universal screw down tables or Sticky Stuff tables
Inquire
SHELF
Shelf for static incubating
Inquire
BIO-SHAKERWEB
ShakerWeb web application for remote display of data and trends as well as remote control of Multitron incubation shakers, all that is needed is a hardware converter and Ethernet cable to connect the Multitron to an in house network
Inquire
SHAKERBAG
ShakerBag option for the Multitron Cell or Multitron Pro, facilitates the cultivation of mammalian, insect or plant cells in disposable bags, gassing packages available, special trays
