Centrifugal Concentrators, HyperVAC-LITETM and HyperVAC-MAXTM
Overview
The HyperVAC-LITE is an affordable, general purpose, centrifugal vacuum concentrator used for rapid, environmentally friendly and efficient vacuum concentration or drying of samples such as DNA/RNA, nucleotides, proteins and other liquid or wet samples with ease, reproducibility and with maintenance of sample integrity. The HyperVAC-MAX has a larger centrifuge body that accommodates a larger roto,r enhancing the capacity of samples to be processed simultaneously.
The HyperVAC-LITE can accommodate from 48 x 2.0 mL and 76 x 0.5 mL micro-tubes to 5 x 50 mL tubes and micro-plates. The HyperVAC-MAX can be used with 200 x 2.0 mL micro-tubes to 12 x 50 mL tubes and deep well plates.
These units evaporate solvents at room temperature to 80 ºC and low pressure without freezing. Easy-to-use automatic systems include timer, start/stop function, vacuum control, adjustable chamber temperature, digital read-out of vacuum and a programming facility. They have a modular design for easy up-grade.
The HyperVAC is used with a drip catcher and an ice cube container unit, connectors including hoses and clips. The evaporation rate can be increased by employing ice cubes around the drip catcher. A HyperVAC concentrator could be connected to a HyperCOOL unit as a cold trap, for more evaporation capacity.
The HyperVAC system requires a vacuum source that generates at least 7 mbar (36 liter per minute), which is perfect for chemical solvent evaporation.
Configured systems listed in the ordering information.
Features of the HyperVAC-LITETM and HyperVAC-MAXTM concentrators:
Table-top form with high space efficiency
Compatible with diaphragm pumps
Accommodates a wide range of sample containers
Automatic control and digital read-out of TIME, TEMP and VAC
Efficient cold trapping by use of drip catcher kit with ice cold trap
Effective concentration of nucleic acids or small volume of organic solvents
Specifications (Click here):
Centrifugal Concentrators, HyperVAC-LITETM and HyperVAC-MAXTM
Specifications
Model:
HyperVAC-LITE
HyperVAC-MAC
Maximum speed: (rpm)
2,000
2,000
Maximum Capacity:
120x1.5/2.0 mL tubes
48 x 1.5/2.0 mL + 76 x 0.5 mL tubes
2 x MTP (Swing-out)
200x1.5/2.0 mL tubes4 x MTP or DWP (Swing-out)
Controller:
Microprocessor
Microprocessor
Auto Start / Stop of Vacuum:
Yes
Yes
Chamber Heating Temp. Range: (°C)
ambient to 80
ambient to 80
Vacuum Pressure: (mbar)
1 ~ 1.013
1 ~ 1.013
Operating Time: (h:m)
< 23:59 or Continuous
< 23:59 or Continuous
Power Requirement: (W)
350
700
Power: (V/Hz)
115/60 or 220/60
115/60 or 220/60
Dimensions: W×D×H (mm)
375 × 445 × 252
475 × 560 × 350
Weight, without rotor: (kg)
22.5
37
Number
Description
Price $
HVC2124-110
HyperVAC-LITE Centrifuge, teflon coated chamber, with heat and time control, 110 V, 60 Hz
7,121.30
HVC2124-220
HyperVAC-LITE Centrifuge, teflon coated chamber, with heat and time control, 220 V, 60 Hz
7,121.30
HVC2200-110
HyperVAC-MAX Centrifuge, teflon coated chamber, with heat and time control, 110 V, 60 Hz
7,793.90
HVC2200-220
HyperVAC-MAX Centrifuge, teflon coated chamber, with heat and time control, 220 V, 60 Hz
7,793.90
GRV-m0.5-2.0-124
Angle rotor for the HyperVAC-LITE, GRV-m0.5/2.0-124
592.95
GRV-m2.0-120
Angle rotor for the HyperVAC-LITE, GRV-m2.0-120
592.95
GRV-50-6
Angle rotor for the HyperVAC-LITE, GRV-50-6 includes 6 GLV-50 Sleeves
885.00
GRV-15-12
Angle Rotor for the HyperVAC-LITE, GRV-15-12 includes 12 GLV-15 Sleeves
979.40
GRV-mw-2
Swing-out Rotor for the HyperVAC-LITE, GRV-mw-2 for Two Micro-plates
1,085.60
GLV-15
AL Sleeve 15 mL (Round and Conical) for GRV-15-12 and GRV-15-48
23.60
GLV-50
AL Sleeve 50 mL (Round) for GRV-50-6 and GRV-50-12
47.20
GLV-c50
AL Sleeve 50mL (Conical) for GRV-50-6 and GRV-50-12
47.20
GRV-m2.0-200
Angle Rotor for the HyperVAC-MAX, GRV-m2.0-200
716.85
GRV-50-12
Angle Rotor for the HyperVAC-MAX, GRV-50-12 includes 12 GLV-50 Sleeves
141.60
GRV-15-48
Angle Rotor for the HyperVAC-MAX, GRV-15-48 includes 48 GLV-15 Sleeves
1758.20
GRV-mw-4
Swing-out Rotor for the HyperVAC-MAX, GRV-mw-4 for Four Micro-plates
2301
GLV-15
AL Sleeve 15ml (Round and Conical) for GRV-15-12 and GRV-15-48
23.60
GLV-50
AL Sleeve 50ml (Round) for GRV-50-6 and GRV-50-12
47.20
GLV-c50
AL Sleeve 50ml (Conical) for GRV-50-6 and GRV-50-12
47.20
GV-DC20A
Drip Catcher Kit A, Acrylic, Ø 20 cm, height 16 cm, includes 500 mL glass bottle and connections to water pump (a 50 cm soft hose, 10 cm vacuum hose (Ø 12/25mm) with 2 clamps to connect to a HyperVAC centrifuge and a Y-shape soft hose to water pump)
1,295.05
GV-DC20B
Drip Catcher Kit B, Acrylic, Ø 20 cm, height 16 cm, includes 500 mL glass bottle and connections to Diaphragm Pump (two 50 cm soft hoses, 10 cm vacuum hoses (Ø 12/25mm) with 2 clamps to connect to a HyperVAC centrifuge and diaphragm pump)
1,295.05
GVP-VE11
VE-11 Water Aspirator Pump
1,834.90
GVP-W2V20
High Vacuum Rotary Vane Pump, 0.4kW(0.5HP)
200 L/min, 1X10-3 torr
2,531.10
GVP-WOF150
Oil Mist Trap
250.75
GVCT-MA
Table A Type for HyperVAC-MAX with HyperCOOL Underneath and a Pump Back-sided
1,681.50
GVCT-MB
Table B Type for HyperVAC-MAX with a Pump Underneath
1,681.50
GZ-HVL-AWP
HyperVAC-LITE Configured System, includes a drip catcher kit-A and a water pump (Hyper-VC2124 centrifuge, GRV-m0.5/2.0-124, GV-DC20a rotors, GVP-VE11 water pump)
10,844.20
GZ-HVL-BDP
HyperVAC-LITE Configured System, includes a drip catcher kit-B and a and a diaphragm pump (Hyper-VC2124 centrifuge, GRV-m0.5/2.0-124, GV-DC20b rotors)
11,540.40
GZ-HVM-BDP
HyperVAC-MAX Configured System, includes a drip catcher kit-B and a diaphragm pump (Hyper-VC2200 centrifuge, GRV-m2.0-200, GV-DC20b rotors)
13,443.15
GZ-HVM-HCA
HyperVAC-MAX Configured System, includes a HyperCOOL -55 °C/4L concentrator, a HC trap plate, a vacuum hose, rotary vane pump, oil mist trap, all connections and a Table A (Hyper-VC2200 centrifuge, GRV-m2.0-200 rotor, Hyper-HC3055 concentrator, HC-CPP-A trap plate, HC-VH vacuum hose, GV-W2V20 rotary vane pump, GVP-WOF150 oil mist trap, GVCT-MA table), vaccum range 0.0013
25,243.15
GZ-HVM-HCB
HyperVAC-MAX Configured System, includes a HyperCOOL -110 °C/4L concentrator, a HC Trap Plate, a vacuum hose, rotary vane pump, oil mist trap, all connections and a Table B (Hyper-VC2200 centrifuge, GRV-m2.0-200 rotor, Hyper-HC3110 concentrator, HC-CPP trap plate, HC-VH vacuum hose, GV-W2V20 rotary vane pump, GVP-WOF150 oil mist trap, GVCT-MB table), vacuum range is 0.0013 mbar
